. 2004 Saturn L-Series Owner Manual Seats and Restraint Systems.

• Saturn L300 Craigslist

Download saturn l series repair manual torrent saturn l series repair pdf how. Shop manual original binder 4 2000 saturn l series repair2015 saturn lseries.

1-1 Front Seats. 1-3 Rear Seats. 1-8 Safety Belts. 1-11 Child Restraints. 1-35 Air Bag Systems. 1-62 Restraint System Check.

1-72 Features and Controls. SATURN and the SATURN Emblem are registered trademarks of Saturn Corporation. GM and the GM Emblem are registered trademarks of General Motors Corporation. This manual includes the latest information at the time it was printed. We reserve the right to make changes after that time without further notice. Safety Warnings and Symbols You will find a number of safety cautions in this book.

We use a box and the word CAUTION to tell you about things that could hurt you if you were to ignore the warning. CAUTION: These mean there is something that could hurt you or other people. Vehicle Damage Warnings Also, in this manual you will find these notices: Notice: These mean there is something that could damage your vehicle. A notice tells about something that can damage your vehicle.

Many times, this damage would not be covered by your vehicle’s warranty, and it could be costly. These are some examples of symbols that may be found on the vehicle.

Section 1 Front Seats.1-3 Manual Seats.1-3 Driver Seat Height Adjuster.1-3 Six-Way Power Driver Seat.1-4 Manual Lumbar.1-4 Heated Seats.1-5 Reclining Seatbacks.1-5 Head Restraints.1-7 Rear Seats.1-8 Split Folding Rear Seat.1-8 Safety Belts.1-11 Safety Belts: They Are for Everyone.1-11 Questions and Answers About Safety Belts.1-15 How to Wear Safety Belts Properly.1-16. Section 1 What Makes an Air Bag Inflate?1-68 How Does an Air Bag Restrain?1-68 What Will You See After an Air Bag Inflates?1-69 Servicing Your Air Bag-Equipped Vehicle.1-71 Adding Equipment to Your Air Bag-Equipped Vehicle.1-72 Seats and Restraint Systems Restraint System Check.1-72 Checking Your Restraint Systems.1-72.

Front Seats Manual Seats CAUTION: You can lose control of the vehicle if you try to adjust a manual driver’s seat while the vehicle is moving. The sudden movement could startle and confuse you, or make you push a pedal when you do not want to. Six-Way Power Driver Seat If your vehicle has this feature, the control is located on the outboard side of the driver’s seat. To adjust the seat do any of the following:.

Move the seat forward or rearward by pressing the center switch forward or rearward. Heated Seats If your vehicle has this feature, the thumbwheel controls for both driver and passenger heated seats are located in the center of the instrument panel. Move the thumbwheel to the first circle to warm the seat to a lower temperature and to the second circle for a higher temperature. On a power driver’s seat, adjust the seatback by pressing the RECLINE switch forward or rearward.

But don’t have a seatback reclined if your vehicle is moving. CAUTION: Sitting in a reclined position when your vehicle is in motion can be dangerous. Even if you buckle up, your safety belts can not do their job when you are reclined like this. The shoulder belt can not do its job because it will not be against your body. Rear Seats Split Folding Rear Seat Your vehicle is equipped with a split folding rear seat. A split folding rear seat enables you to carry long cargo by folding down part or all of the rear seat. Sedan On sedans, you can fold either the driver’s or passenger’s right side of the seatback separately.

CAUTION: A safety belt that is improperly routed, not properly attached, or twisted will not provide the protection needed in a crash. The person wearing the belt could be seriously injured. After raising the rear seatback, always check to be sure that the safety belts are properly routed and attached, and are not twisted. Wagon On wagons, you can fold either the passenger’s side of the seatback or the entire seatback. To fold down the passenger’s side of the seatback, pull the lever on the corner of the seatback. To lower the entire rear seatback, pull the lever on the corner of the driver’s side seatback.

Safety Belts Safety Belts: They Are for Everyone This part of the manual tells you how to use safety belts properly. It also tells you some things you should not do with safety belts. CAUTION: Do not let anyone ride where he or she can not wear a safety belt properly. You never know if you’ll be in a crash. If you do have a crash, you don’t know if it will be a bad one. A few crashes are mild, and some crashes can be so serious that even buckled up, a person wouldn’t survive.

But most crashes are in between. Put someone on it.

Get it up to speed. Then stop the vehicle. The rider doesn’t stop. The person keeps going until stopped by something. In or the instrument panel. A real vehicle, it could be the windshield.

or the safety belts! With safety belts, you slow down as the vehicle does. You get more time to stop. You stop over more distance, and your strongest bones take the forces. That’s why safety belts make such good sense. Questions and Answers About Safety Belts Won’t I be trapped in the vehicle after an.

Making It Easy Getting the repair info you need has never been easier. You can do that too. With your online Mercedes-Benz C230 repair manual from RepairSurge, you can view the information on your computer or mobile device. Want to print it out? Air conditioner doesn't work, emits a smell, blocked vents, weak air flow, heater doesn't produce heat, etc. 2005 mercedes c230 owners manual.

If I’m a good driver, and I never drive far from home, why should I wear safety belts? You may be an excellent driver, but if you’re in an accident – even one that isn’t your fault – you and your passengers can be hurt.

Lap-Shoulder Belt The driver has a lap-shoulder belt. Here is how to wear it properly. Close and lock the door. Adjust the seat so you can sit up straight.

To see how, see “Seats” in the Index. Pick up the latch plate and pull the belt across you. Do not let it get twisted. To make the lap part tight, pull down on the buckle The lap part of the belt should be worn low and snug on end of the belt as you pull up on the shoulder belt. The hips, just touching the thighs. In a crash, this applies force to the strong pelvic bones. Shoulder Belt Height Adjuster Before you begin to drive, move the shoulder belt adjuster to the height that is right for you.

To move it down, press down on the indented part of the height adjuster and move the height adjuster to the desired position. What’s wrong with this? The shoulder belt is too loose.

It will not give nearly as much protection this way. 1-20 CAUTION: You can be seriously hurt if your shoulder belt is too loose. In a crash, you would move forward too much, which could increase injury. What’s wrong with this? The belt is buckled in the wrong place. CAUTION: You can be seriously injured if your belt is buckled in the wrong place like this. In a crash, the belt would go up over your abdomen.

The belt forces would be there, not at the pelvic bones. What’s wrong with this? The shoulder belt is worn under the arm. It should be worn over the shoulder at all times. 1-22 CAUTION: You can be seriously injured if you wear the shoulder belt under your arm. In a crash, your body would move too far forward, which would increase the chance of head and neck injury.

What’s wrong with this? The belt is twisted across the body. CAUTION: You can be seriously injured by a twisted belt. In a crash, you wouldn’t have the full width of the belt to spread impact forces.

Saturn L300 Craigslist

If a belt is twisted, make it straight so it can work properly, or ask your retailer to fix it. To unlatch the belt, just push the button on the buckle. The belt should go back out of the way. Before you close the door, be sure the belt is out of the way. If you slam the door on it, you can damage both the belt and your vehicle.

The best way to protect the fetus is to protect the mother. When a safety belt is worn properly, it’s more likely that the fetus won’t be hurt in a crash.

For pregnant women, as for anyone, the key to making safety belts effective is wearing them properly. Lap-Shoulder Belt All rear seating positions have lap-shoulder belts.

Here is how to wear one properly. Pick up the latch plate and pull the belt across you. Do not let it get twisted. The shoulder belt may lock if you pull the belt across you very quickly. The lap part of the belt should be worn low and snug on the hips, just touching the thighs.

In a crash this applies force to the strong pelvic bones. And you would be less likely to slide under the lap belt.

If you slid under it, the belt would apply force at your abdomen. To unlatch the belt, just push the button on the buckle. 1-28 Rear Seat Outside Passenger Positions (Wagon). Lap-Shoulder Belt The positions next to the windows have lap-shoulder belts. Here is how to wear one properly. Pick up the latch plate and pull the belt across you. Do not let it get twisted.

The shoulder belt may lock if you pull the belt across you very quickly. The lap part of the belt should be worn low and snug on the hips, just touching the thighs.

In a crash this applies force to the strong pelvic bones. 1-30 And you would be less likely to slide under the lap belt. If you slid under it, the belt would apply force at your abdomen. Center Rear Passenger Position (Wagon) To unlatch the belt, just push the button on the buckle. Lap Belt When you sit in the center seating position, you have a lap safety belt, which has no retractor. To make the belt longer, tilt the latch plate and pull it along the belt.

1-32 To make the belt shorter, pull its free end as shown until the belt is snug. Rear Safety Belt Comfort Guides for Children and Small Adults If you would like to have rear shoulder belt comfort guides installed on your vehicle, contact your retailer. Rear shoulder belt comfort guides will provide added safety belt comfort for older children who have outgrown booster seats and for small adults. Slide the guide under and past the belt. The elastic cord must be under the belt. Then, place the guide over the belt, and insert the two edges of the belt into the slots of the guide.

Be sure that the belt is not twisted and it lies flat. The elastic cord must be under the belt and the guide on top. Safety Belt Extender If the vehicle’s safety belt will fasten around you, you should use it. But if a safety belt is not long enough to fasten, your retailer will order you an extender.

When you go in to order it, take the heaviest coat you will wear, so the extender will be long enough for you. What is the proper way to wear safety belts?

If possible, an older child should wear a lap-shoulder belt and get the additional restraint a shoulder belt can provide. The shoulder belt should not cross the face or neck. The lap belt should fit snugly below the hips, just touching the top of the thighs. CAUTION: Never do this. Here two children are wearing the same belt. The belt can not properly spread the impact forces. In a crash, the two children can be crushed together and seriously injured.

A belt must be used by only one person at a time. What if a child is wearing a lap-shoulder belt, but the child is so small that the shoulder belt is very close to the child’s face or neck?.

1-38 CAUTION: Never do this. Here a child is sitting in a seat that has a lap-shoulder belt, but the shoulder part is behind the child. If the child wears the belt in this way, in a crash the child might slide under the belt. Every time infants and young children ride in vehicles, they should have the protection provided by appropriate restraints. Young children should not use the vehicle’s adult safety belts alone, unless there is no other choice.

Instead, they need to use a child restraint. CAUTION: People should never hold a baby in their arms while riding in a vehicle. 1-40 CAUTION: Children who are up against, or very close to, any air bag when it inflates can be seriously injured or killed.

Air bags plus lap-shoulder belts offer outstanding protection for adults and older children, but not for young children and infants. For most basic types of child restraints, there are many different models available.

When purchasing a child restraint, be sure it is designed to be used in a motor vehicle. If it is, the restraint will have a label saying that it meets federal motor vehicle safety standards. Child Restraint Systems An infant car bed (A), a special bed made for use in a motor vehicle, is an infant restraint system designed to restrain or position a child on a continuous flat surface. Make sure that the infant’s head rests toward the center of the vehicle. A forward-facing child seat (C-E) provides restraint for the child’s body with the harness and also sometimes with surfaces such as T-shaped or shelf-like shields.

A booster seat (F-G) is a child restraint designed to improve the fit of the vehicle’s safety belt system. Some booster seats have a shoulder belt positioner, and some high-back booster seats have a five-point harness. How do child restraints work?

A child restraint system is any device designed for use in a motor vehicle to restrain, seat, or position children. A built-in child restraint system is a permanent part of the motor vehicle. An add-on child restraint system is a portable one, which is purchased by the vehicle’s owner. Here is why: CAUTION: A child in a rear-facing child restraint can be seriously injured or killed if the right front passenger’s air bag inflates. This is because the back of the rear-facing child restraint would be very close to the inflating air bag.

Always secure a rear-facing child restraint in a rear seat. Top Strap Some child restraints have a top strap, or “top tether.” It can help restrain the child restraint during a collision. For it to work, a top strap must be properly anchored to the vehicle. Some top strap-equipped child restraints are designed for use with or without the top strap being anchored. CAUTION: Each top tether bracket is designed to anchor only one child restraint. Attaching more than one child restraint to a single bracket could cause the anchor to come loose or even break during a crash. A child or others could be injured if this happens.

Sedan The anchors are located behind the rear seat on the filler panel. In order to get to one of these brackets, you will have to open the trim cover. The trim cover is marked with the symbol for child seat top tether anchor. 1-48 Wagon Anchor brackets are located on the floor in the. CAUTION: Routing the top strap for a child restraint over or under the cargo shade could cause the shade to come loose and even break. If this happens, the shade could be thrown about the vehicle in a collision or sudden maneuver. You or others could be injured.

Lower Anchorages and Top Tethers for Children (LATCH System) Your vehicle has the LATCH system. You’ll find anchors (A) for all three rear seating positions. This system, designed to make installation of child restraints easier, does not use the vehicle’s safety belts.

Instead, it uses vehicle anchors (A, B) and child restraint attachments to secure the restraints. In order to use the LATCH system in your vehicle, you need a child restraint designed for that system.

To assist you in locating the lower anchors for this child restraint system, each seating position with the LATCH system has a label on the seatback at each lower anchor position. Securing a Child Restraint Designed for the LATCH System 1. Find the LATCH anchorages for the seating position you want to use, where the bottom of the seatback meets the back of the seat cushion. See Lower Anchorages and Top Tethers for Children (LATCH System) on page 1-50.

Buckle the belt. Make sure the release button is 4. Pull the rest of shoulder belt all the way out of the positioned so you would be able to unbuckle the retractor to set the lock. Safety belt quickly if you ever had to.

To tighten the belt, pull up on the shoulder belt while you push down on the child restraint. If you are using a forward-facing child restraint, you may find it helpful to use your knee to push down on the child restraint as you tighten the belt.

Buckle the belt. Make sure the release button is 4. Pull the rest of shoulder belt all the way out of the positioned so you would be able to unbuckle the retractor to set the lock. Safety belt quickly if you ever had to. To tighten the belt, pull up on the shoulder belt while you push down on the child restraint. If you are using a forward-facing child restraint, you may find it helpful to use your knee to push down on the child restraint as you tighten the belt. Make the belt as long as possible by tilting the latch plate and pulling it along the belt.

Put the restraint on the seat. Run the vehicle’s safety belt through or around the restraint. The child restraint instructions will show you how. Buckle the belt.

Make sure the release button is positioned so you would be able to unbuckle the safety belt quickly if you ever had to. To tighten the belt, pull its free end while you push down on the child restraint. If you are using a forward-facing child restraint, you may find it helpful to use your knee to push the child restraint as you tighten the belt. There is no top strap anchor in the right front passenger’s position. Do not secure a child seat in this position if a national or local law requires that the top strap be anchored, or if the instructions that come with the child restraint say that the top strap must be anchored.

Buckle the belt. Make sure the release button is 5.

Pull the rest of the shoulder belt all the way out of positioned so you would be able to unbuckle the the retractor to set the lock. Safety belt quickly if you ever had to.

To tighten the belt, push down on the child restraint, pull the shoulder portion of the belt to tighten the lap portion of the belt and feed the shoulder belt back into the retractor. You may find it helpful to use your knee to push down on the child restraint as you tighten the belt.

Air Bag Systems This part explains the frontal and side impact air bag systems. Your vehicle has four air bags:. A frontal air bag for the driver and another frontal air bag for the right front passenger,. A roof-mounted side impact air bag for the driver and passenger directly behind the driver, and. CAUTION: (Continued) They are not designed to inflate in frontal, in rollover or in rear crashes. Everyone in your vehicle should wear a safety belt properly – whether or not there is an air bag for that person. CAUTION: Both frontal and side impact air bags inflate with great force, faster than the blink of an eye.

There is a air bag readiness light on the instrument panel, which shows the air bag symbol. The system checks the air bag electrical system for malfunctions. The light tells you if there is an electrical problem. See Air Bag Readiness Light on page 3-28 for more information.

The right front passenger’s frontal air bag is in the instrument panel on the passenger’s side. If your vehicle has a side impact air bag for the driver and the person seated directly behind the driver, it is in the ceiling above the side windows. If your vehicle has a side impact air bag for the right front passenger and the person seated directly behind that passenger, it is in the ceiling above the side windows. 1-66 CAUTION: If something is between an occupant and an air bag, the bag might not inflate properly or it might force the object into that person causing severe injury or even death.

When Should an Air Bag Inflate? The driver’s and right front passenger’s frontal air bags are designed to inflate in moderate to severe frontal or near-frontal crashes. But they are designed to inflate only if the impact speed is above the system’s designed “threshold level.”. What Makes an Air Bag Inflate? In an impact of sufficient severity, the air bag sensing system detects that the vehicle is in a crash.

For both frontal and side impact air bags, the sensing system triggers a release of gas from the inflator, which inflates the air bag. What Will You See After an Air Bag Inflates? After the air bag inflates, it quickly deflates, so quickly that some people may not even realize the air bag inflated. Some components of the air bag module will be hot for a short time. These components include the steering wheel hub for the driver’s frontal air bag and the instrument panel for the right front passenger’s frontal air bag. You must first turn your ignition key to the following ignition switch positions: 1.

Turn the ignition key to the OFF position. Turn the ignition key to the RUN position. Turn the ignition key to the OFF position. In many crashes severe enough to inflate an air bag, windshields are broken by vehicle deformation. You don’t want the system to inflate while someone is working on your vehicle. Your retailer and the Saturn Service Manual have information about servicing your vehicle and the air bag systems. To purchase a service manual, see Service Publications Ordering Information on page 7-10.

Adding Equipment to Your Air Bag-Equipped Vehicle If I add a luggage carrier or sunroof to the roof of my vehicle, will it keep the roof-mounted side impact air bags from working properly? As long as the luggage carrier or sunroof is properly installed so that the vehicle’s basic structure isn’t changed, it’s not likely to keep the roof-mounted side impact air bags from working.

Replacing Restraint System Parts After a Crash CAUTION: A crash can damage the restraint systems in your vehicle. A damaged restraint system may not properly protect the person using it, resulting in serious injury or even death in a crash. To help make sure your restraint systems are working properly after a crash, have them inspected and any necessary replacements made as soon as possible.

NOTES 1-74. Section 2 Keys.2-3 Remote Keyless Entry System.2-4 Remote Keyless Entry System Operation.2-5 Doors and Locks.2-9 Door Locks.2-9 Power Door Locks.2-10 Delayed Locking.2-10 Programmable Automatic Door Locks.2-11 Rear Door Security Locks.2-11 Lockout Protection.2-12 Leaving Your Vehicle.2-12 Trunk/Liftgate.2-13 Windows.2-16. Section 2 Storage Areas.2-41 Glove Box.2-41 Center Console Storage Area.2-41 Assist Handles.2-41 Features and Controls Load Floor Storage Box.2-42 Roof Rack System.2-42 Cargo Cover.2-43 Sunroof.2-45.

Keys CAUTION: Leaving children in a vehicle with the ignition key is dangerous for many reasons. They could operate the power windows or other controls or even make the vehicle move. The children or others could be badly injured or even killed. One key is used for the ignition and all of the locks. Key code information can be obtained only at the retailer where your vehicle was purchased.

These code numbers can be used to make new keys. Additional keys that are needed can be made at any retail service facility provided you have the key code information. Replacement” and “Resynchronization” under Remote Keyless Entry System Operation on page 2-5.

If you are still having trouble, see your Saturn retailer or authorized service provider for service. Remote Keyless Entry System Operation With this feature, you can lock and unlock the doors. UNLOCK: Press this button on the remote keyless entry transmitter to unlock the driver’s door.

This also disarms the theft-deterrent system. See “Theft-Deterrent System” following for information on disarming the theft-deterrent system. Press the button again within 5 seconds to unlock the rest of the doors. (Panic Alarm): Press the button with the horn symbol when the ignition is turned off. A chime will sound once the mode has been selected. If you accidentally set off the alarm when entering/exiting the vehicle, you can shut it off by pressing any button on the remote keyless entry transmitter other than the panic alarm button.

If you hear three horn chirps when you press the unlock button on the transmitter, that means the vehicle’s alarm was triggered while you were away. Once the transmitter is separated, use a pencil or similar object to remove the old battery. Do not use a metal object.

Insert the new battery as the instructions under the cover indicate. Snap the transmitter back together tightly to be sure no moisture can enter. Doors and Locks Door Locks CAUTION: Unlocked doors can be dangerous. Passengers — especially children — can easily open the doors and fall out of a moving vehicle. When a door is locked, the handle will not open it. You increase the chance of being thrown out of the vehicle in a crash if the doors are not locked.

Power Door Locks Press the bottom half of the switch on either front door to lock all of the doors. Push the top half of the switch to unlock all of the doors. The unlocked door indicators on the manual door lock pins will be hidden when the doors are locked.

Programmable Automatic Door Locks With this feature, all the doors will lock as the transaxle is shifted out of PARK (P) if the ignition key is in the RUN position and all doors are closed. The doors will automatically lock if the vehicle is going faster than 3 mph (5 km/h). When you want to open a rear door when the security lock is on, do the following: 1. Unlock the door using the remote keyless entry transmitter, the front door power lock switch, or by lifting the rear door manual lock. Trunk/Liftgate CAUTION: It can be dangerous to drive with the trunk or liftgate open because carbon monoxide (CO) gas can come into your vehicle. You can not see or smell CO. It can cause unconsciousness and even death.If you must drive with the trunk or liftgate open or if electrical wiring or other cable connections must pass through the seal between the body.

Liftgate Release (Wagon) Unlock the liftgate by doing any of the following:. Press the unlock button on your remote keyless entry transmitter twice. Press the liftgate button on your transmitter. Press the interior door unlock switch.

Enable the automatic door unlocking feature. Emergency Trunk Release Handle (Sedan) There is a glow-in-the-dark trunk release handle located inside the trunk near the bottom edge of the trunk lid. This handle will glow following exposure to light.

Notice: Using the emergency trunk release handle as a tie-down or anchor point when securing items in the trunk may damage it. Windows CAUTION: Leaving children, helpless adults, or pets in a vehicle with the windows closed is dangerous.

They can be overcome by the extreme heat and suffer permanent injuries or even death from heat stroke. Never leave a child, a helpless adult, or a pet alone in a vehicle, especially with the windows closed in warm or hot weather. Manual Windows On a vehicle with manual windows, use the window crank to open and close each window. Power Windows Switches are located on each side of the shift lever on the console.

To open a window press the switch down and lift up to close it. Window Lock Out The driver’s window controls also include a lock-out switch. Press the window lock switch to the left to stop rear passengers from using their window switches. The driver can still control all the windows with the lock on. During normal operation, the security light will go off approximately five seconds after the key is turned to the RUN ignition position following an engine start. If the engine stalls and the security light flashes, wait until the light stops flashing before trying to restart the engine.

Ignition Positions With the key in the ignition switch, you can turn the switch to four positions. OFF: This position locks your steering column in a vehicle with a manual transmission. It is a theft-deterrent feature. You will only be able to remove your key when the ignition is turned to OFF.

Starting Your Engine Automatic Transaxle Move your shift lever to PARK (P) or NEUTRAL (N). Your engine won’t start in any other position — that is a safety feature. To restart when you’re already moving, use NEUTRAL (N) only. Notice: Shifting into PARK (P) with the vehicle moving could damage the transaxle.

Engine Coolant Heater If your vehicle has this feature, in very cold weather, 20°F ( 29°C) or colder, the engine coolant heater can help. You’ll get easier starting and better fuel economy during engine warm-up.

Usually, the coolant heater should be plugged in a minimum of four hours prior to starting your vehicle. Automatic Transaxle Operation Your vehicle is equipped with an automatic transaxle, the shift lever is located on the console between the seats. There are several positions for the shift lever. PARK (P): This position locks your front wheels. It’s the best position to use when you start your engine because your vehicle can’t move easily.

Then move the shift lever into the gear you wish. Press the shift lever button before moving the shift lever. See Shifting Out of Park (P) on page 2-30.

REVERSE (R): Use this gear to back up. Notice: Shifting to REVERSE (R) while your vehicle is moving forward could damage the transaxle. AUTOMATIC OVERDRIVE ( ): This position is for normal driving with the automatic transaxle. If you need more power for passing, and you’re:. Going less than about 35 mph (55 km/h), push your accelerator pedal about halfway down. Going about 35 mph (55 km/h), push your accelerator all the way down. Shift Lock Release If you ever hold the brake pedal down, but still cannot shift out of PARK (P), try this: 1.

Turn the ignition to OFF and remove the key. Carefully pry the shift lock override cover from the floor shift console.

Parking Brake The parking brake lever is located between the bucket seats. When parking your vehicle, set the parking brake before shifting your automatic transaxle into PARK (P). To set the parking brake, hold the brake pedal down and pull up on the parking brake lever. If the ignition is on, the brake system warning light will come on. Shifting Into Park (P) (Automatic Transaxle) CAUTION: It can be dangerous to get out of your vehicle if the shift lever is not fully in PARK (P) with the parking brake firmly set.

Your vehicle can roll. If you have left the engine running, the vehicle can move suddenly.

Leaving Your Vehicle With the Engine Running CAUTION: It can be dangerous to leave your vehicle with the engine running. Your vehicle could move suddenly if the shift lever is not fully in PARK (P) with the parking brake firmly set. And, if you leave the vehicle with the engine running, it could overheat and even catch fire. Shifting Out of Park (P) Your vehicle has an automatic transaxle shift lock control system. You have to fully apply your regular brakes before you can shift from PARK (P) when the ignition is in RUN. See Automatic Transaxle Operation on page 2-23.

If you cannot shift out of PARK (P), ease pressure on the shift lever and push the shift lever all the way into PARK (P), while pressing the button on the shift. Engine Exhaust CAUTION: Engine exhaust can kill. It contains the gas carbon monoxide (CO), which you can not see or smell. It can cause unconsciousness and death.

You might have exhaust coming in if:. Your exhaust system sounds strange or different. Running Your Engine While You Are Parked It is better not to park with the engine running. But if you ever have to, here are some things to know. CAUTION: Idling the engine with the climate control system off could allow dangerous exhaust into your vehicle. Mirrors Manual Rearview Mirror While you are sitting in a comfortable driving position, adjust the mirror so you can see clearly behind your vehicle. Grip the mirror in the center to move it up or down and side to side.

The day/night adjustment, located at the bottom of the mirror, allows you to adjust the mirror to avoid glare from the lamps behind you. Automatic Dimming Rearview Mirror ® with OnStar, Compass and Temperature Display Your vehicle may have this feature. When on, an automatic dimming mirror automatically dims to the proper level to minimize glare from lights behind you after dark. The mirror also includes a duel display in the upper right corner of the mirror face. Automatic Dimming Mirror Operation The automatic dimming mirror function is turned on automatically each time the ignition is started. To operate the automatic dimming mirror do the following: 1. Make sure the indicator light, located to the left of the on/off button, is lit.

If it’s not, press and hold the on/off button for approximately six seconds until the light comes on, indicating that the mirror is in automatic dimming mode. To adjust for compass variance do the following: 1. Find your current location and variance zone number on the following zone map. Press and hold the on/off button until a zone number appears in the display. The compass is now in zone mode.

Temperature Display The temperature can be displayed by pressing the TEMP button. Pressing the TEMP button once briefly, will toggle the temperature reading from Fahrenheit (°F), Celsius (°C), to off. Automatic Dimming Mirror Operation Press the COMP button to turn the automatic dimming feature on and off.

To adjust for compass variance: 1. Find your current location and variance zone number on the following zone map. Press and hold the COMP button for five seconds until a zone number appears in the display. Press the COMP button on the bottom of the mirror until the new zone number appears in the display. Outside Power Mirrors The outside power mirror control is located on the driver’s door.

Use the selector switch located above the round touch pad to choose either the left or right outside mirror. To adjust the mirror press the round touch pad in the desired direction. ® OnStar System ® OnStar uses global positioning system (GPS) satellite technology, wireless communications, and call centers to provide you with a wide range of safety, security, information and convenience services.

® A complete OnStar user’s guide and the terms and ®. Luxury and Leisure Plan. All Directions and Connections Plan services. Personal Concierge ® OnStar Personal Calling ® With OnStar Personal Calling, you have a safer way to stay connected while driving. It’s a hands-free wireless phone that’s integrated into your vehicle. You can place calls nationwide using voice-activated dialing with no contracts and no additional roaming charges.

Load Floor Storage Box Some wagon models have a load floor storage box, which is located in the rear of the vehicle. This storage space is designed to hold small items. Roof Rack System Your vehicle may have the roof rack system to load things on.

Do not exceed the maximum vehicle capacity when loading your vehicle. For more information on vehicle capacity and loading, see Loading Your Vehicle on page 4-34. To prevent damage or loss of cargo as you’re driving, check frequently to ensure your cargo is securely fastened. Removing the Cargo Cover To remove the cargo shade: 1.

Unhook the shade and allow it to retract all the way. Grasp the shade on the driver’s side of the vehicle and move it toward the passenger’s side, compressing the spring. Sunroof If your vehicle has this feature, the switch will be located above your rearview mirror. Your ignition key must be in the RUN or ACC position to operate the sunroof. To open the sunroof three-quarters of the way, press and hold the SLIDE portion of the switch. NOTES 2-46.

Section 3 Instrument Panel Overview.3-2 Hazard Warning Flashers.3-4 Other Warning Devices.3-5 Horn.3-5 Tilt Wheel.3-5 Turn Signal/Multifunction Lever.3-6 Windshield Wiper Lever.3-8 Cruise Control.3-10 Exterior Lamps.3-13 Interior Lamps.3-15 Accessory Power Outlets.3-16 Ashtrays and Cigarette Lighter.3-17 Climate Controls.3-17 Climate Control System.3-17. Instrument Panel Overview. The main components of the instrument panel are the following: A. See Outlet Adjustment on page 3-24.

Turn Signal/Multifunction Lever. See Turn Signal/Multifunction Lever on page 3-6.

Cruise Control (If Equipped). See Cruise Control on page 3-10. Hazard Warning Flashers Your hazard warning flashers let you warn others. They also let police know you have a problem. Your front and rear turn signal lamps will flash on and off. The hazard warning flasher button is located near the center of the instrument panel.

Other Warning Devices If you carry reflective triangles, you can set one up at the side of the road about 300 feet (100 m) behind your vehicle. Horn You can sound the horn by pressing the center of your steering wheel. Tilt Wheel Your vehicle may have a tilt wheel which allows you to adjust the steering wheel before you drive. Turn Signal/Multifunction Lever The lever on the left side of the steering column includes the following:. Turn and Lane-Change Signals. Headlamps.

Headlamp High/Low-Beam Changer. Flash-to-Pass Feature For additional information on the exterior lamps, see Exterior Lamps on page 3-13. Turn and Lane-Change Signals The turn signal has two upward (for right) and two downward (for left) positions.

Headlamp High/Low-Beam Changer To change the headlamps from low beam to high or high beam to low, pull the turn signal lever all the way towards you. Then release it. When the high beams are on, this light on the instrument panel cluster will also be on. Windshield Wiper Lever The lever on the right side of the steering column operates the windshield wipers.: Pull the lever down and release it for a single wiping cycle.

The lever will return to its original position. For more cycles, hold the lever down before releasing it.: Put the lever in this position to turn off the wipers. Windshield Washer CAUTION: In freezing weather, do not use your washer until the windshield is warmed. Otherwise the washer fluid can form ice on the windshield, blocking your vision. Pull the windshield wiper lever toward you to operate the windshield wipers. Washer fluid will squirt onto the windshield and the wipers will run for a few cycles to clear the windshield.

Cruise Control The buttons for the cruise control are located on the steering wheel. (Cruise On/Off): Push this button to turn the system on and off. (Resume/Accelerate): Push this button to make the vehicle resume a previously set speed or to accelerate when cruise is already active. Setting Cruise Control CAUTION: If you leave your cruise control on when you are not using cruise, you might hit a button and go into cruise when you do not want to. You could be startled and even lose control.

Keep the cruise control switch off until you want to use cruise control. Increasing Speed While Using Cruise Control There are two ways to go to a higher speed:. Use the accelerator pedal to get to the higher speed.

Press the set/coast button, then release the button and the accelerator pedal. You’ll now cruise at the higher speed. Ending Cruise Control To end a cruise control session, step lightly on the brake pedal. Stepping on the brake will end the current cruise control session only. Press the cruise on/off button to turn off the system completely. Erasing Speed Memory When you turn off the cruise control or the ignition, your cruise control set speed memory is erased. Automatic Headlamp System When it is dark enough outside, the headlamps will come on automatically.

Your vehicle has a light sensor located on top of the instrument panel. Make sure it is not covered, or the headlamps will be on when you don’t need them.

Interior Lamps Instrument Panel Brightness This feature controls the brightness of the instrument panel lights. The thumbwheel for this feature is located on the instrument panel to the left of the steering column. Turn the thumbwheel up to brighten the lights or down to dim them. Battery Run-Down Protection Your vehicle is equipped with a battery saver feature designed to protect your vehicle’s battery. When any interior lamp is left on and the ignition is turned off, the battery rundown protection system will automatically turn the lamp off after 20 minutes. Accessory Power Outlets The accessory power outlets can be used to connect electrical equipment such as a cellular phone.

Ashtrays and Cigarette Lighter Your vehicle may have an ashtray and cigarette lighter. To use the lighter, just push it in all the way and let go. When it’s ready, it will pop back out by itself.

Notice: Holding a cigarette lighter in while it is heating will not allow the lighter to back away from the heating element when it is hot. Operation To change the current mode, turn the right knob to select one of the following: (Vent): This mode directs air to the instrument panel outlets.

(Bi-Level): This mode directs half of the air to the instrument panel outlets, and then directs most of the remaining air to the floor outlets. AC (Air Conditioning): Press this button to turn the air-conditioning system on or off.

When A/C is pressed, an indicator light above the button will come on to let you know that air conditioning is activated. On hot days, open the windows to let hot inside air escape. Rear Window Defogger The rear window defogger uses a warming grid to remove fog or frost from the rear window.

Try this,out of owners manual You can set the clock on your radio one of two ways depending on the model. You can either push and hold the RCL button and the TUNE/SEEK button at the same time, (left=hour, right=min). Or if you have the other model available you can push and hold the RCL button and the AUTO EQ button at the same time. You will hear a beep to let you know you can now change the time. Release the RCL button and use AUTO EQ(left=hour, right=min) to change time.How to set the clock on a Saturn car radio - YouTube 1:12 www.youtube.com/watch?v=vV1pW-EDIog.